Vaude BADAWI LONG/TC, User Manual

Page: 16 / 54

16
DISmANTLING THE TENT
1. Detach the ridge pole from the pole sleeve.
2. Unfasten the pole feet and let the tent collapse together. Tip: Before dis-
mantling the poles, loosen the outer tent buckles.
3. Slide out the poles(do not pull them!).
4. Remove the ridge pole.
5. Put the poles together and roll them together with the tent by hand. Do
not force the poles afterwards into the full bag!
STOrAGE/CArE/rEPAIrS:
• As soon as the tent is dry and clean it can be stored in its pack sack in
a well-ventilated, cool and dry place. Please do not store the tent near
paints, adhesives, oils, plastics, or fuels (gas canisters, etc.)! The gasses
emitted from these materials contain plasticizers that can damage your
tent over time.
• Zips are always a weak point in a tent’s structure. If they get dirty, clean
them with a (tooth) brush and lubricate them with graphite (pencil lead),
silicon or sewing machine oil. Apply carefully and remove excess oil with a
soft cloth.
• Never store your tent when it’s wet for a longer period of time. Unpack
it as soon as you arrive and dry it out in a well-ventilated place. To do so,
separate the inner and outer tents or use the poles to create space bet-
ween the two.
• Do not whip out tent poles and snap the sections together. This can
damage the pole ends as well as the anodization. Check the poles regu-
larly for cracks or other potential damage. Wash the poles and use silicon
spray at any sign of corrosion (from salt water, for example)
• VAUDE only uses poles from the renowned manufacturers DAC and
Yunan. These tend to become slightly bent with use, helping to reduce
fracturing. Please do not attempt to bend these back into shape. Alt-
hough aluminum is extremely flexible this might damage or even break
the poles. Every VAUDE tent comes with a Pole Doctor or repair sleeve. If a
tent pole breaks while out on a trip, simply slide the repair sleeve over the
broken section and then use tape to attach it. (z)