Vatech PaX-i3D Smart, Installation Manual

Page: 91 / 161

Pax-i3D Smart(PHT-30LFO) Installation Manual
91
7 Setting up PC’s Environment Variables
7.6
Setting Folder exclusions with Anti-virus Software
1. Set the virus scan exception for the files and folder related to this
equipment.
2. Do not run the memory-resident background programs unrelated to the
equipment.
3. Running the virus scan is recommended to be performed only when
equipment is idle.
4. Turn the firewall off.
5. Always use the blank USB drive, whenever possible.
Some files used by the PaX-i3D Smart are incorrectly recognized as virus(es)/trojan(s) by anti-virus
software. If you are using anti-virus software on your PC, you must exclude those files from all scans
performed by the anti-virus software.
For the PaX-i3D Smart, the following folder and files should be excluded with the virus scan.
Files Path
C:\Program Files\Vatech C:\VCaptureSW
For example: Suppose the Anti-virus program from McAfee is running in the background.
Note: The procedure to set folder exclusions is similar for most anti-virus programs.
1. Open the McAfee Anti-Virus program, and select the "VirusScan".
2. Right-click on the "On-Access Scan" menu option, and left-click on the "Properties" tab.
3. Select the " All Processes → Detection → Exclusions " menu option, and choose the " Add " menu
button.
4. Navigate to the folder or the files you want to designate an exclusion path for, and select the check
box to "Also Exclude Subfolders". Click "OK" when complete, and exit McAfee for the path exclusion
to be complete.