Vatech EzRay Air W, Installation Manual

Page: 37 / 68

3 . Installing the Equipment
EzRay Air W (Model: VEX-S300W) Installation Manual 27
EN
G
LISH
3.3 Installing the Horizontal Arm
The length of the horizontal arm:
L= 450, 600, and 900 mm
Depending on arm’s length, the height where control unit is to be
installed is of critical importance.
The installation procedures are the same regardless of the arm’s
length.
1. After pulling out the cables through the opening, insert the horizontal arm into the hole
on the Power Box Assembly.
2. Fix the block assembly using the anti-rotation block2 ( Part No. 2 ), anti-rotation block
stiffner ( Part No. 3 ) and wrench bolts ( Part No. 12 ).
Allen wrench
3 mm
Horizontal arm Cable included
ANTI ROTATION
BLOCK2
Part No.:16
Qty.: 1 ea
ANTI ROTATION
BLOCK
STIFFNER
Part No.: 17
Qty.: 1 ea
WRENCH BOLT
Part No.: 20,
w/spring and flat
washer
Size: M5 x 20
Qty.: 2 ea