5. Service Mode
EzRay Air Portable
(Model: VEX-P300) User Manual 57
EN
G
L
ISH
5.3.11 Password Setting
Follow the procedure below to change the password.
Service Mode No.
Item
n.24
Password setting
To change the password,
1.
Select
n.24
and press the jog dial. The default password
“000”
is displayed on
the control panel, as shown in the right figure.
2.
When the first digit flashes, turn the jog dial to change the password and then
save it by pressing the jog dial.
3.
Follow the same procedure for the next two digits.
4.
Press the dial until you hear a beep.
5.
Check if the new password has been correctly saved.
