Series 292
MAINTENANCE
603585EA
Edition 2015-05-18
19/31
9. Lubricate new O-rings (8, 10) slightly with VAT high vacuum grease.
10. Mount lubricated O-rings (8, 10) to the setting piece (3).
11. Insert setting piece (3) and circlip (5).
Do not damage O-rings while inserting setting piece (3).
12. Mount setscrew (4) by using Loctite 222.
The dimension of 2.40 ±0.2 must be met!
13. Put new plate seal (O-ring, 63) on groove and press it crosswise into groove at 4 points.
14. Press entire plate seal (O-ring, 63) uniformly into groove.
15. Mount new bonnet seal (O-ring, 64) into groove.
16. Insert "actuator/plate" assembly carefully into the valve body.
Do not cant!
17. Mount 4 screws (59) uniformly and crosswise in 2 to 3 steps. Torque screws with
2.3Nm.
18. Mount new O-Rings (7) and (9)
19. Attach the soft-pump valve to the main valve by mounting the 2 screws (6) and torque
the screws with 2.3 Nm
