Doc. # 01
-
04
-
033A
Operation Cont’d
Touchscreen Controls
Set your exposure cycle by selecting either
ENTER TIME or SELECT PRESET on the home
screen. Your machine has the ability to save
and recall up to 10 presets, storing vacuum and
exposure times. Selecting ENTER TIME by
default will set the vacuum time to 10 seconds
and the exposure time to 10 seconds. These
settings can be changed and saved away in a
preset.
Setting the vacuum time:
1)
From the setup screen, press the number
under the label VACUUM.
2)
Enter a time from 0
-
999 seconds.
3)
Press DELETE enough times to enter the
desired time.
4)
Press ENTER to confirm selection.
Setting the exposure time:
1)
From the setup screen press the number
under the label EXPOSURE .
2)
Enter a time from 0
-
999 seconds.
3)
Press DELETE enough times to enter the
desired time.
4)
Press ENTER to confirm selection.
Running an exposure cycle:
1)
From the setup screen, select RUN to start
the exposure cycle.
2)
The remaining vacuum and exposing time
are shown on the run screen.
To end the cycle at any time, select
CANCEL. Pressing CANCEL will return to
the setup screen.
3)
After completing a cycle, EXPOSURE
COMPLETE will be displayed. Press OK to
return to the setup screen.
Home Screen
Vacuum/Exposure Screen
Setup Screen
Press for vacuum
Press for exposure
Press to run
Press to save
preset
Return to home screen
Run Screen
Pg. 7
