MOUNTING SWITCHES 11
MOUNTING CO2 RF SWITCH
Always install the
CO2
RF switch in an easily accessible location in the room in
which you wish to monitor the
CO2
concentration. Always provide a 230 V power
supply for the switch.
Step 1: Dismantle
the switch.
Step 4:
Connect the 230V
supply voltage to
the connectors.
Step 2:
Screw the base plate
onto the wall.
Step 5:
Place the cover back
on the switch.
Step 3:
Open the cover on the base
plate to reveal the electrical
connections.
MOUNTING RH RF SWITCH
Always install the RH RF switch in an easily accessible place in the bathroom.
Step 1: Dismantle the
switch.
Step 2: Draw the screw
holes of the base plate
onto the wall.
Step 3: Screw the base
plate to the wall.
Step 4: Place the cover
back on the switch.
