Varytec Street Bar MK3, User Manual

Page: 35 / 60

A sound controlled automatic show can only be activated when the unit is operating in stand
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
Press
[MODE] repeatedly until the display shows ‘SUxx’ . This activates a sound controlled auto‐
matic show.
Now you can adjust the sensitivity of the built-in microphone for sound control. Use
[UP] and
[DOWN] to select a value between 0 (low sensitivity) and 31 (high sensitivity), the display
shows ‘SU00’ … ‘SU31’ .
Wait about 30 seconds until the display turns dark. Then the settings have been applied. To
return to the parent menu without making changes, press [MODE] .
Sound control and microphone
sensitivity
Operating
Street Bar MK3 IP65 16x3W RGB
35
LED bar