Symptom
Remedy
The unit does not work, no light
Check the mains connection and the main fuse.
No response to the DMX con‐
troller
1. When the display flashes, e.g.
‘d001’
, no valid DMX
signal is received. Check whether the DMX controller is
switched on. Check the DMX connectors and cables for
proper connection.
2. If the display is not flashing but there is still no
response, check the address settings and the DMX
polarity.
3. Try using another DMX controller.
4. Check whether the DMX cables run near or parallel to
high-voltage cables that may cause damage or interfer‐
ence to a DMX interface circuit.
If the procedures recommended above do not succeed, please contact our Service Center. You
can find the contact information at
www.thomann.de
.
Troubleshooting
Street Bar MK3 IP65 16x3W RGB
53
LED bar
Summary of Contents for Street Bar MK3
