Sound to Light mode
to choose the sound to light mode, go on as you read here:
-
Push the ESC button first. Then use UP/DOWN buttons until you see “Soun” in the
display. Push ENTER
-
You can read “Soux” in the display and with the UP/DOWN buttons you can choose
between the 2 sound programs.
Master Slave mode
-
Push the ESC button first. Then use UP/DOWN buttons until you see “SLav” in the
display. Push ENTER.
-
Now the fixtures works in slave mode and copies exact the values from the master
fixture.
-
For the connection of master fixture and slave fixture, please use a standard dmx 3
pole XLR 110 Ohms cable. Connect the male connector to the master and the female
connector to the slave fixture. Go on like this until all the fixtures you want to be
connected, are connected. Set up your desired settings at the master and all the
slaves will copy the functions of this fixture.
Version number
-
Push the ESC button first. Then use UP/DOWN buttons until you see “VER” in the
display. Push ENTER
-
Now you can see the actual software version. Leave the menu with ESC.
IMPORTER / IMPORTEUR:
B&K Braun GmbH
Industriestrasse 1
D-76307 Karlsbad
Germany
[31]
button first. Then use UP/DOWN buttons until you see “Soun” in the
You can read “Soux” in the display and with the UP/DOWN buttons you can choose
UP/DOWN buttons until you see “SLav” in the
Now the fixtures works in slave mode and copies exact the values from the master
For the connection of master fixture and slave fixture, please use a standard dmx 3
cable. Connect the male connector to the master and the female
connector to the slave fixture. Go on like this until all the fixtures you want to be
connected, are connected. Set up your desired settings at the master and all the
Push the ESC button first. Then use UP/DOWN buttons until you see “VER” in the
Now you can see the actual software version. Leave the menu with ESC.
V 1.0
