VT190 DiamondVue User Guide 150-065
You can use an HD-15 connector cable or a BNC adapter cable to connect the flat panel
monitor to the host computer. The HD-15 video cable (supplied in the kit) you use with this
monitor is equipped with a conventional HD-15 connector at each end.
5
Note:
The following figure is the view looking into the pin end of the male connector or solder
term end of the female connector.
Pin Signal
Pin Signal
Pin Signal
1 T.M.D.S.
Data2-
9 T.M.D.S. Data1-
17 T.M.D.S. Data0-
2 T.M.D.S.
Data2+
10 T.M.D.S. Data1+
18 T.M.D.S. Data0+
3
T.M.D.S. Data2/4 Shield
11
T.M.D.S. Data1/3 Shield
19 T.M.D.S. Data0/5 Shield
4 T.M.D.S.
Data4-
12 T.M.D.S. Data3-
20 T.M.D.S. Data5-
5 T.M.D.S.
Data4+
13 T.M.D.S. Data3+
21 T.M.D.S. Data5+
6
DDC Clock
14
+5V Power
22 T.M.D.S. Clock Shield
7
DDC Data
15
Ground (return for +5V, H. Sync and V. Sync)
23 T.M.D.S. Clock+
8
Analog Vertical Sync
16
Hot Plug Detect
24 T.M.D.S. Clock-
DVI-I
Pin Signal
C1 Analog
Red
C2 Analog
Green
C3 Analog
Blue
C4
Analog H. Sync
C5 Analog
Ground
DVI-I
DVI-I Connector
(Digital / Analog)
Pin
Signal
Pin
Signal
Pin
Signal
1
Red Video
6
Red Video Ground
11
Not Used
2
Green Video
7
Green Video Ground
12
Bi-Directional Data
3
Blue Video
8
Blue Video Ground
13
Horizontal Sync
4
Not Used
9
No Connection
14
Vertical Sync
5
Return
10
Sync Ground
15
Data Clock (SCL)
HD15 Connector
The following table provides the pin numbers and corresponding pin assignments for
the HD-15 video connector.
17
9
1
8
16
24
C5
C4
C3
C2
C1
Composite Video Input Connector: CVBS 1.0V p-p
S-Video: S-VHS
LUMA Signal Input 0.7V p-p
CHROMA Signal Input 0.7V p-p
2.5
Signal Connections Cont.
HD15 Connector
