5
Värmebaronen Viking Bio 35
Operation - Technical data
The Viking Bio 35 is a forward-burning pellet burner for wood
pellets.
Fuel and air are mixed in a controlled fashion in the burner.
This is the basis for environmentally-friendly combustion
and high efficiency.
The Viking Bio 35 can be installed on most boilers with
a power range that matches the power of the burner.
The Viking Bio is fully automatic and controlled by the
boiler thermostat. A temperature sensor is available as
an accessory. This causes the burner to control the boiler
temperature. This function is advantageous in boilers in
which hot water is produced in a heat exchanger.
The safety system in the pellet system with the Viking Bio
consists of overheating protection, a thermal relay on the
downpipe, a non-combustible hose between the feed auger
and the downpipe, a fan with a fan guard, flame monitoring
and blocking if the ambient temperature is high.
Different operating modes can be selected: high power, low
power or two power stages.
The burner can have a start delay, which extends the running
time and thus increases the efficiency.
There are indicators on the burner. By flashing in different
ways, they provide information about operating phases and
alarms.
Pellets are fed to the burner automatically from the fuel store
via a feed auger controlled by the burner. The safety in the
feed system consists of overheating protection on the down
duct, a meltable hose between the feed auger and the burner
and overload protection for the feed auger motor.
To simplify installation and maintenance, the burner has quick
attachments that make it easy to attach the burner to the boiler
and remove it. All electrical connections have quick couplers.
The burner is supplied with a connection cable, flue gas
thermometer and ash rake.
Screw 1,500 mm art. no. 33 01
RSK 639 07 47
Screw 2,500 mm art. no. 33 02
RSK 639 07 48
Ø
154
219
317
444
165
303
256
Type
Viking Bio 35
Art. no.
3351
Weight
15 kg
Ambient temperature
10 - 30 °C
Heat
supplied low power
supplied high power
22
35
kW
kW
Voltage
230 V~, ±10%, 50 Hz
Fuse protection
10 A
Power consumption
high power
low power
standby
start/ignition
25
16
3.5
150
W
W
W
W
Enclosure protection class
IPx1
Draught requirements
-15 -0 Pa
Chimney
height
diameter
>3
>100
m
mm
Combustion chamber, min
h x w x d 305 x 305 x 515 mm
Pressure in combustion chamber
-15 -0 Pa
Sound pressure
65 dBA
Fuel, quality
wood pellet in accordance with
EN 14961:2 cl. A1
Pellet size
Ø6-8 mm
Emission class
in accordance with
EN 15270
4
Feed auger
230 V~ / 15 W
