Varitronics Z9000 Series, Manual

Page: 6 / 31

2.0 PERFORMANCE AND SPECIFICATIONS
2.1 Performance Description
2.1.1 The Varitronics’ Z9000 Ophthalmic Control System is a device used for
coordinating the switching of incandescent and fluorescent room lighting (the
fluorescent lighting is optional) with the instrumentation and test devices used in
the ophthalmologic exam room. Several models are available but the electric
requirements are the same for all.
2.1.2 The electronic device combines solid-state electronics with hard-wired
line current by means of a connecting cable.
2.1.3 The location of the main power box will vary depending on which model is
purchased. These units are meant to work with 115 VAC only.
2.1.4 Have the doctor or architect check all intended locations before installing.
ATTENTION: Installation of the Varitronics’ Ophthalmic Control System is the
responsibility of the end user.
2.2 Electrical Specifications For All Z9000 Models
DEVICE MAXIMUM LOAD
Incandescent Room Lighting 300 Watts
Optional Fluorescent lighting 80 Watts
Slit Lamp 40 Watts
Auxiliary Outlet 60 Watts
Lamp Receptacle 60 Watts
Projector Receptacle 60 Watts
Indirect Ophthalmoscope Hanger 1 AMP at 6 VAC
Fixation Lighting 12vdc at 40 ma
Muscle Light 12vdc at 40 ma
Charging Current For Handheld Devices 40 to 70 ma
Z9000 System Total 700 Watts
CAUTION: Input voltage 115 VAC 60 Hz