OPERATING MANUAL -
SAXMAG V
Page 30
• Remove the bolts (M2.05) and pull-off the containment shell (M2.03) from the intermediate flange
(M3.01).
! As regards the containment shell (M2.03), please remember that some remainders of the pumped
fluid may still be in the pump. For safety instructions, please see the relevant media data sheet.
• Remove nut M18 (M3.13) and washer (M3.12) from the pump shaft (M3.08).
• Separate the internal magnet (M2.04) from the pump shaft (M3.08) with the help of a suitable
pull-off device.
• Remove the thrust washer (M3.11) from the pump shaft (M3.08).
• Pull-off the intermediate flange (M3.01) via the pump shaft (M3.08).
•
Heat the intermediate flange (M3.01) to approx. 80°C. Press-out the shaft slide bearing (M3.09)
from the bearing seat.
• Press out the pump shaft (M3.08) from the rotor (02).
! Make sure that the thrust washer (M3.10) will not be damaged because it loosens when pump
shaft (M3.08) and rotor (02) are pressed out.
Summary of Contents for SaxMag V Series
Page 34: ...Page 34...
Page 35: ...Page 35...
