OPERATING MANUAL -
SAXMAG V
Page 12
3
Transport, intermediate storage
3.1 Transport
The pump unit must be transported properly by competent personnel. Make sure that the
pump or pump unit remains in a horizontal position during transport so that it will not slip
out of the transport suspension points.
It is not permitted to attach the slinging ropes to the free shaft end of the pump or to the
ring loops of the motor. Any slippage of the transport suspension points may cause risk of
personal injury and damage to property. Please note that the ring bolt on the bearing
lantern is the only slinging point for the pump.
Make sure to use suitable lifting devices for transport. The transport locking devices
supplied with the pump can be removed after transport.
During start-up and maintenance, ensure safe transport of all
components. To this end, suitable suspension facilities
should be used.
Transport and handling must be performed by competent
personnel in order to prevent any damage to the pump and
injuries to personnel.
The lifting lugs of the various components may only be used for
lifting components. The suspension points of some support
frames are indicated in
bold
in the figure on the right.
Max. lifting speed: V/max < 0.5 m/s
Always use two ropes to be secured in such a way Never lift the pump at one suspension point only.
that the pump cannot slip. Make sure that the pump
Incorrect lifting may result in personal injury
unit is suspended in a horizontal position!
and/or damage to property.
Summary of Contents for SaxMag V Series
Page 34: ...Page 34...
Page 35: ...Page 35...
