Transport:
Lifting equipment should always be used to move the machine.
The machine must not be pulled or lifted by the bowl lift handle.
When the machine is moved, it should be in a vertical position at all times.
Installation, adjustments and fixing:
The ambient temperature around the machine must not exceed 45
ºC.
Arrange the machine so there is room for normal use and maintenance
The floor for the machine and the workspace must be firm, even and level
Especially for floor model - Adjustments:
The height of the legs should be adjusted
so that the bowl on the
bowl trolley fits perfectly into the bowl arms.
The bowl arms should be at the correct height above the floor before
the machine is taken into use – see “
Condition 1” and Condition 2.
It is of the utmost importance that the machine’s legs are adjusted so that the
conditions described by the following sketch are met:
Condition 1:
The top of the mixer must be parallel to the floor. To ensure this you must measure the distance from the top of the ma
-
chine to the floor:
The dimension must be the same when measured at the front of the mixer
and at the rear of the mixer:
Condition 2
The mixer must be height adjusted so that the bowl on the bowl trolley fits exactly in the bowl arms:
Basically, the dimension
from floor to centre of the knobs on the bowl arms must be 79 cm( KODIAK 20) / 86,5 cm
(KODIAK 30). If the bowl on the bowl trolley does not fit exactly in the bowl arms at this dimension, adjust slightly on the
front legs of the mixer.
Especially for table model - fixing and adjustment:
KODIAK 20 table model must be fixed to the table it is placed on.
KODIAK 20 table model is fixed with bolts in the two hind legs
.
Bolts with dimensions M10 x 20 mm + table top thickness and a
washer are used.
The table must be suitable for machine’s weight and operation.
Height adjustment:
If the table is not fully even, justifications can be made by adjusting
the two front legs.
The adjustment is made as described for the floor model - see
above.
Together with the mixer
comes a fixed spanner to
be used for adjustments.
3
1
2
79 cm
