Varifan MST-5C, Manual

Page: 7 / 48

MST-5C INSTALLATION
MST-5C Section B-7
This section will inform the electrician on proper wiring and installation
procedures for the MST-5C.
The manufacturer recommends that the following installation instructions to be
followed as closely as possible, and that all work be performed by a certified
electrician. Failure to do so may void the warranty.
Unpacking
Unpack the MST-5C and inspect contents for damage. Should the contents
appear to be damaged, contact your local distributor to return the equipment.
The package should contain the following standard items:
1 MST-5C control (or MST-5C/H which includes a port for humidity probe)
4 Brackets / 4 screws
1 2004-10K temperature probe
1 Installation / User’s Guide
Mounting Hardware Required
This is the list of the mounting hardware needed, which is not included with the
product:
Shielded two-wire cable, AWG #22 (to extend probes).
Shielded two-wire twisted pair cable, AWG #22 (used for communication) see
electrician notes for capacitance selection.
4 screws (to hang the unit onto the wall).
Screwdrivers.
Soldering iron kit or approved sealed connectors.
Drill and hole saw kit
www.monitrol.com