Varifan MST-5C, Manual

Page: 33 / 48

MST-5C USER’S GUIDE
MST-5C Section C-33
(POS 8)
Gap Between Probes Alarm
gAp p
This parameter is used to establish the maximum temperature difference
tolerated between an activated inside temperature probe and the
temperature calculation that the probe is part of. If this temperature
difference is greater than this parameter, the alarm will sound. The probe
with the biggest gap will be eliminated and then another check will be made
to verify if another probe exceeds the maximum temperature gap allowed
and eliminated it. When two or fewer probes remain in the temperature
calculation,
Gap Between Probes Alarm will no longer be checked and will
no longer be visible. All probes eliminated this way will be excluded from all
temperature calculations. This parameter is adjusted in 0.1° increments
from 0.5°F to 20.0°F (0.3°C to 11.1°C).
Relative Outside Temperature Alarm OutAl
This parameter is used to establish the temperature that will be added to
the
Outside Probe to create the high alarm threshold. When the Outside
Probe is above the Main Set Point , the high alarm condition will occur if
the Average Temperature is above Outside Probe + Relative Outside
Temperature Alarm . Setting this parameter to
OFF
will deactivate the
outside temperature’s influence on the high alarm threshold. This parameter
is adjusted in 0.1° increments from 0.5°F to 40.0°F,
OFF (0.3°C to
22.2°C,
OFF
).
(POS 9)
Clock Format
Hr Fr
This parameter is used to set the format in which the time of day will be
displayed. If this parameter is set to
24H , the Clock parameter will be
displayed in the 24-hour format. If this parameter is set to
A-P
, the
Clock parameter will be displayed in the AM/PM format.
Display Language LANG
This parameter is used to select the language used by the MST-5C. If this
parameter is set to
ENG
, the configuration will use the English language.
If this parameter is set to FrA , the configuration will use the French
language.
(POS 10)
RF Channel
rF CH
This parameter is used to select one of the 16 frequencies of the WiFarm
network or deactivates wireless communication mode. If this parameter is
set to
OFF , other wireless communication parameters will disappear.
This parameter can be adjusted to
OFF
, 1 to 16.
www.monitrol.com