ProStar 335 Photodiode Array Detector
45
Installation
General
Basic installation requires connecting the Varian ProStar 335
detector to power, connecting the Ethernet cable to the PC or
network. In addition, the ProStar 335 requires connection to the
column outlet, the detector flowcell inlet and outlet, a back
pressure restrictor and to waste.
All power and signal cable connections are located on the rear
panel of the module. All hydraulic connections are made outside
the covered area of the module and do not require the removal of
any protective panels.
NOTE:
For information regarding loading Varian Star Chromatography
Workstation software, refer to Star Workstation documentation. For
information regarding loading Varian Galaxie Chromatography
Workstation or chromatography data system software, refer to Galaxie
documentation.
