Models 947, 948 and 960 Leak Detectors Operations and Service Manual
A-7
[SHIFT]
SET
TST TM
SHOW
Sets the value of the Auto Sequencer Test Time. Enter XXX
(the desired value), followed by the SHIFT key, then the
function key.
SET
RUF TM
SHOW
Displays the value of the Auto Sequencer Roughing Time.
[SHIFT]
SET
RUF TM
SHOW
Sets the value of the Auto Sequencer Roughing Time. Enter XXX
(the desired value), followed by the SHIFT key, then the
function key.
ON
A SEQ
OFF
Turns off the Auto Sequencer function.
[SHIFT]
ON
A SEQ
OFF
Turns on the Auto Sequencer function.
2
FIL SEL
1
Selects filament #1 in the Ion Source.
[SHIFT]
2
FIL SEL
1
Selects filament #2 in the Ion Source.
OUT V
SHOW
FIL #
Displays the active filament number.
[SHIFT]
OUT V
SHOW
FIL #
Displays the format of the analog leak rate output voltage.
[SHIFT]
RAW DTA
1
Displays a set of readings from the leak rate A/D conversion.
SET
REJ #
SHOW
Displays the active reject set point (1 through 4) and the value of
the reject set point.
[SHIFT]
SET
REJ #
SHOW
Sets the active reject set point. Enter a number from 1 through 4,
then press the function key.
SET
STD LK
SHOW
Displays the leak rate value to which the leak detector calibrates.
