Vari F-530.1, Instructions For Use Manual, Page: 16 / 41

F-530.1
16
2. Fasten the slide shoe to the knife casing by means of slide shoe studs with flat
washers and self-locking nuts.
Figure 6: Slide shoe assembly
5.7.2 Swinging and mixing knife complement
The complement can be replaced with the standard assembly of “Flat knife 52 cm“.
It is used at cutting the grass stands of lower densities with a higher proportion of thick-
walled plants or self-seeded tree species up to a max. diameter of 1 cm. Knife
complement assembly onto the shaft see chapter 6.3.
6 Maintenance, care and storage
To ensure a long-term satisfaction with our product, it must be given proper care and
maintenance. Regular maintenance of the machine will prevent its early wear ensuring
at the same time a correct functioning of all its parts.
Follow all instructions for intervals of machine maintenance and adjustment. It is
advices that you keep records on the number of machine working hours and on the
conditions in which the machine was working (for service purposes). Similarly as the
current maintenance, the after-season maintenance should be entrusted to one of our
authorized service workshops.

Regarding the machine weight, maintenance and adjustment are to be done by
two persons.
6.1 Lubrication
6.1.1 Gear oil replacement and refilling

When replacing oils, follow the basic hygienic principles, regulations and laws
on environment protection.
Slide shoe
Slide shoe stud
Flat washer ø 8
Self-locking nut M8
Knife casing
Cutting height
adjustment draw
bar
Pin with the lock