Vari Lite VL4000 BeamWash Luminaire, User Manual

Page: 41 / 120

I
NSTALLATION
: I
NSTALLATION
P
ROCEDURES
2
0 2 . 9 7 0 4 . 6 0 0 2 0 1 7 M a r c h 2 0 1 5 23
Figure 2-9: Safety Cable Installation / Luminaire Hanging
Step 4. Make sure tilt and pan locks are disengaged so luminaire moves freely.
Step 5. Connect power and data cables according to procedure given in “Connecting Data and
Power” on page 24 .
22.32 in.
[566.93 mm]
35.04 in.
[890.0 mm]
28.92 in.
[734.6 mm]
30.00 in.
[762.0 mm]
NOTE: The safety cable anchor point is tested and is in compliance
of the following safety standards:
- IEC / EN 60598-2-17.6.6
- UL1573
Safety Cable Anchor Point
(see note)
Note, truss hooks shown are sold separately. Truss and pipe by others.
Safety Cable Anchor Point
Safety Cable: Recommended for hanging installations. May be required by local codes. Safety cable is sold
separately.
Câble de sécurité: Recommandé pour les installations pendaison. Peut être exigé par les codes locaux.
Câble de sécurité est vendu séparément.