Vari Lite VL4000 BeamWash Luminaire, User Manual

Page: 30 / 120

VARI
❋
LITE - VL4000 B
EAM
W
ASH
L
UMINAIRE
U
SER
’
S
M
ANUAL
1 2 1 7 M a r c h 2 0 1 5 0 2 . 9 7 0 4 . 6 0 0 2 0
Power and Data Cabling Requirements
Power
The luminaire requires standard AC power distribution from 200-240 VAC, 50/60 Hz. Current
required depends on the AC supply voltage and product model. Refer to
“Current vs. Voltage” on
page 14 for all models covered in this manual.
Note: The mating Neutrik® powerCON® True1 connector is supplied, however, you will need to
purchase or construct a cable appropriate for your application. Available power input cables is found in
“Replacement Items/Accessories” on page 8 .
Figure 2-1: Power Connector
Depending on the application, the luminaire’s AC input cable may require a different connector. If
required, install a new connector meeting your requirements using the following wire color code
reference:
AC Power Input
3-Pole Neutrik® powerCON® True1 for AC Input Power
Neutrik® powerCON® True1
AC Input Connector
Wire* Connection
Green/Yellow AC Ground
Blue AC Neutral
Brown AC Line
* International (Harmonized) Standard