background image

F

OREWORD

0 2 . 9 6 7 9 . 0 0 1 0   0

iii

Safety Notice

It is extremely important to read ALL safety information and instructions provided in this manual and 
any accompanying documentation before installing and operating the products described herein.  Heed 
all cautions and warnings during installation and use of this product.

Safety symbols used throughout this manual are as follows:

GENERAL INFORMATION PERTAINING TO PROTECTION AGAINST ELECTRICAL SHOCK, 
FIRE, EXPOSURE TO EXCESSIVE UV RADIATION, AND INJURY TO PERSONS CAN BE 
FOUND BELOW.

WARNING:
INSTRUCTIONS FOR CONTINUED PROTECTION AGAINST FIRE

1. VARI

LITE luminaires have been designed for use with specific lamp types. VL3015 & VL3515 

Spot Luminaires require an Osram HMI 1200 W/S metal halide lamp. Installing another type of 
lamp may be hazardous.

2. Luminaires may be mounted on any type of surface as long as mounting instructions are followed.  

See instructions detailed in this manual.

3. Note distance requirement from combustible materials or illuminated objects for VARI

LITE 

luminaires.

WARNING:
INSTRUCTIONS FOR CONTINUED PROTECTION AGAINST ELECTRICAL SHOCK

1. VARI

LITE luminaires are designed for dry locations only. Exposure to rain or moisture may 

damage luminaire.

2. Disconnect power before servicing any VARI

LITE equipment.

3. Servicing to be performed by qualified personnel only.  

CAUTION

 advising of potential damage to product.

WARNING

 advising of potential injury or death to persons.

Summary of Contents for VL3015



















































































































































































































Reviews: