Vari Lite VL3015, Service Manual

Page: 43 / 210

M
AINTENANCE
P
ROCEDURES
: R
EFLECTOR
C
HANGE
0 2 . 9 6 7 9 . 0 0 1 0 0 25
2
Step 5. As shown in Figure 2-4 , remove stored reflector by removing acorn nut and foam washer
securing reflector in luminaire head assembly. Set reflector aside on a soft clean cloth.
Figure 2-4: Reflector Removal (From Storage Location)
Step 6. As shown in Figure 2-5 , at rear of luminaire head (hot box assembly), loosen four 1/4-turn
screws and slide lamp box back and out (it is hinged).
Step 7. One side at a time, using a small flat-blade screwdriver, carefully pry lamp from socket and
remove lamp. Set lamp aside on a soft clean cloth.
Figure 2-5: Lamp Removal
Foam Washer
Acorn Nut
Reflector Assembly
Reflector Assembly Storage Location
Hot Box Assembly
Reflector Assembly
Lamp