background image

VARI

LITE - VL3015 & VL3515 S

POT

 L

UMINAIRES

 S

ERVICE

 M

ANUAL

2 2

0 2 . 9 6 7 9 . 0 0 1 0   0

Maintenance Procedures

WARNING:  

As with any repairs or maintenance to VARI

LITE luminaires, service should only be 

performed by a trained and qualified service technician or at an Authorized Vari-Lite Service facility.

Lamp Replacement

Vari-Lite Part No:  71.9686.1502

WARNING:  

Ensure that power is removed from luminaire when installing lamp.

CAUTION:  

Wear cotton gloves or other covering while installing lamp. Touching lamp glass with 

bare fingers will leave oil and may cause the lamp to explode or reduce lamp life. If touched, use 
alcohol and cotton cloth to thoroughly clean glass portion of lamp.

To replace lamp:

Step

1. Ensure power is removed from luminaire.

Step

2. At rear of luminaire head, loosen four 1/4-turn screws and slide lamp box back and out (it is 

hinged).

Step

3. One side at a time, using a small flat-blade screwdriver, carefully pry lamp from socket and 

remove current lamp.

Step

4. Position new lamp with dimple side down. One side at a time, press lamp into socket clips. 

Ensure lamp is seated fully in place.

Step

5. Close lamp box and re-tighten 1/4-turn screws.

Step

6. Align lamp as detailed in 

“Align Lamp” on page 23

.

Figure 2-1:  Installing Lamp

Lamp (dimple side down*)

Reflector

Lamp Box

Luminaire Head Not Shown For Clarity

Lamp Connector

CAUTION:

Do not touch lamp or
reflector with bare fingers.

CAUTION:

Allow lamp to cool
before servicing.

NOTE: *Dimple, on lamp, towards reflector.

Summary of Contents for VL3015



















































































































































































































Reviews: