User Manual: UM19893-EN
Harmony3 series
Revision: 5.0
Date of release: 2019-01-29
16
/20
www.vareximaging.com
6.
Disposal and EMC compatibility
6.1.
Disposal
This device contains substances that can be hazardous to the environment and care should be taken
when disposed of.
The device is marked with the following symbol:
Follow national and local regulations regarding disposal of electronic equipment.
Packaging material shall be recycled according national and local regulations.
6.2.
EMC compatibility
The device conforms to IEC 60601-1-2:2014 for EMC compatibility and must be installed and put into
service according to the EMC information provided in the Technical Manual.
WARNING:
Use of this equipment adjacent to or stacked with other equipment should be avoided
because it could result in improper operation. If such use is necessary, this
equipment and the other equipment should be observed to verify that they are
operating normally.
WARNING:
Use of accessories, transducers and cables other than those specified or provided by
the manufacturer of this equipment could result in increased electromagnetic
emissions or decreased electromagnetic immunity of this equipment and result in
improper operation.
WARNING:
Portable RF communications equipment (including peripherals such as antenna
cables and external antennas) should be used no closer than 30 cm (12 inches) to
any part of the device, including cables specified by the manufacturer. Otherwise,
degradation of the performance of this equipment could result.
NOTE:
The EMISSIONS characteristics of this equipment make it suitable for use in
industrial areas and hospitals (CISPR 11 class A). If it is used in a residential
environment (for which CISPR 11 class B is normally required) this equipment might
not offer adequate protection to radio-frequency communication services. The user
might need to take mitigation measures, such as relocating or re-orienting the
equipment.
