1. Getting
Started
What’s In the Box
•
1 x Really Amazing VF6b VaporFlame E
ff
ect Unit
•
1 x Power Cord
•
1 x VF6b Manual
•
1 x VaporFlame Bleeder Hose
“Let’s Unpack That…”
Hey! Look at that! You are the proud owner of a shiny new VaporFlame fixture. You
now have the power to make “fire” from water- Pretty cool huh? As you unpack your
VaporFlame fixture from its shipping material make sure all the parts are present.
Inspect the unit for damage that may have occurred in transport. The VaporFlame
fixtures are pretty hearty, but sometimes accidents happen. Please keep the original
packing material for inspection. If a fixture must be returned to the factory, it is
important that it is sent in the original packing.
Powering Up
All fixtures must be powered directly o
ff
a switched circuit and cannot be run o
ff
a
rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is
used solely for a 0% to 100% switch.
The VaporFlame 6b requires an input voltage of 100-240 VAC
, and has an internal
auto switching power supply. Be sure the input voltage applied to the fixture matches
these specifications.
Irreparable damage may occur if the incorrect is voltage
supplied.
Getting A Hold of Us
If you need more information, or something goes wrong, please
contact us at
www.vaporflame.net
. We love talking shop and will be happy to troubleshoot any
challenges with you. Really!
Disclaimer: The information and specifications contained in this document are subject
to change without notice. VaporFlame Inc. assumes no responsibility or liability for any
errors or omissions that may appear in this user manual. VaporFlame Inc. reserves the
right to update the existing document or to create a new document to correct any errors
or omissions at any time. You can download the latest version of this document from
www.vaporflame.net.
Page of
3
12
Rev. 2.0 11/20
