background image

Warranty  

VaporFlame provides a limited warranty for all fixtures and engines.

Each fixture (VF6b) has a 2-year warranty, including parts and labor.

Warranty on each fixture is only valid if fixture was operated under normal conditions.

To apply for the warranty, the fixture must be shipped, at owners expense, to 
VaporFlame.  VaporFlame will then assess the fixture to evaluate the issue and 
determine if the issue falls under the warranty.  

If VaporFlame determines the fixture is under warranty, then VaporFlame will correct the 
issue and ship back to owner at VaporFlame’s expense.  If VaporFlame determines the 
fixture is not under warranty, VaporFlame will ship the fixture back to the owner at the 
owners expense.

If VaporFlame determines the fixture is not under warranty, but the owner would like to 
VaporFlame to correct the issue, the owner will be charged time and materials.  
VaporFlame will provide an estimate to the owner to correct the issue and the owner 
must pay prior to VaporFlame correcting the issue.  Once the issue on the fixture has 
been addressed, VaporFlame will ship the fixture back to the owner at the owners 
expense.

Warranty for light fixtures falls under the light fixture manufacture’s warranty and not 
under VaporFlame.

Page   of 

11

12

Rev. 2.0 11/20

Summary of Contents for VF6b













Reviews: