background image

2. Safety Instructions 

Please keep this User Guide for future use. If you sell the unit to someone else, be sure 
that they also receive this User Guide. 

ALWAYS make sure that you are connecting to the proper voltage, and that the line 
voltage you are connecting to is not higher than that stated on the decal or rear panel 
of the fixture. 

NEVER use any liquid other than water in the unit. ONLY clean potable water should 
be used. White vinegar may be added to prevent odors from forming.  

DO NOT allow water to flow into the air line. This will cause damage to the unit

DO NOT allow water to remain in the fixture when not in use.  This could cause an 
unpleasant odor when used or bacterial growth in the water tubes.  

In the event of an unpleasant odor the internal water tubes must be cleaned 
immediately.  

It is RECOMMENDED to add 2oz of white vinegar to every 5 gallons of water to clean 
internal water tubes.

ALWAYS bleed remaining water from unit before storing.

The unit must be installed in a location with adequate ventilation.

DO NOT place objects directly in the main e

ect plume as they may get wet.  The 

main plume is described as the part of the e

ect closest to the nozzle tip where the 

water has yet to atomize.   

ALWAYS secure unit and lighting fixture using separate safety chains. NEVER carry 
the fixture by its head. Be sure the VaporFlame is secured to its light source.  

PROTECT THE UNIT FROM FREEZING. DO NOT operate at ambient temperatures 
lower than 20°F (-6°C) or higher than 104°F (40°C). DO NOT allow water to remain in 
the unit with the unit OFF at ambient temperatures lower than 40°F (4°C).

In the event of a serious operating problem, stop using the unit immediately. NEVER 
try to repair the unit by yourself. Repairs carried out by unskilled people can lead to 
damage or malfunction. Please contact the nearest authorized technical assistance 
center. Always use the same type spare parts. 

NEVER connect the device to a dimmer pack.Make sure the power cord is never 
crimped or damaged.

Caution!

 There are no user serviceable parts inside the unit. Do not open the housing 

or attempt any repairs yourself. In the unlikely event your unit may require service, 
please contact us at at www.vaporflame.net. 

Page   of 

4

12

Rev. 2.0 11/20

Summary of Contents for VF6b













Reviews: