18
1.
Before storing the sprayer follow the steps for
cleaning the sprayer and spray gun.
2.
Remove the High-Pressure hose from the sprayer.
3.
Remove the Primer Output Tube (H) and Suction
Tube (J) with Inlet Screen (K) from the pump.
4.
W ith the Sprayer turned over, add one ounce
(30ml) of multi-purpose light machine oil such as
sewing machine oil or ISO 22 oil to both the
Suction Tube (J) and Primer Output Tube (H).
Prime
5.
Set the Spray/Prime Switch (F) to the Spray
Position.
6.
Set the Pressure Control Knob (D) to the Low
Spray position.
7.
Use a rag to cover the Output Port (E).
Power ON for 5s then OFF
8.
Place the power ON / OFF Switch (B) to the ON
position for FIVE SECONDS, then turn the power
ON /OFF Switch (B) to the OFF position.
Spray
9.
Set the Spray/Prime Switch (F) to the Prime
Position to ensure the oil stays in the system while
being stored.
10. Replace the Primer Output Tube (H) and Suction
Tube (J) onto the pump.
11. W ipe the sprayer with a clean cloth and store out
of reach of children.
V0.1
19802
Summary of Contents for 19802
Page 23: ...23 PARTS DIAGRAM 19802 V0 1...
Page 25: ...25 NOTES 19802 V0 1...
Page 26: ...26 NOTES V0 1 19802...
Page 27: ...27 NOTES 19802 V0 1...
