VT-M2M-APL Win10 User’s Manual
After you installing the system, maybe serial port number order is not necessarily the same as in my picture as follows,
Please refer to the actual installation.
Quectel USB AT port (COM5) is used to send AT commands to EC20.
Quectel USB NMEA port (COM7) is used to receive GNSS signal from EC20.
2.
Double click tool “TestCommPC V2.3.2.exe”, and follow these steps:
Set Port number (COM5) and Baud (38400), then click “Open” button.
Input command “AT+QGPS=1” at command line.
Click “Write” button, the result of command will be displayed on the right, “OK” means GPS is turned on successfully.
The details as follow:
3.
Click “RCT-1[1].1.0BETA.exe” as administrator, then click “COM” button to set GNSS COM port (COM7) and baud (38400),
and click “OK” button.
