VT-M2M-APL Win10 User’s Manual
4.
Then it will pop up a dialog to remind you that system will reset. And click “OK”, system will auto restart.
At this point, enabling the secure boot function has been completed.If you want to check secure boot status, please refer to
4.1.3.
4.1.2 Disable Secure Boot
Similar to the steps in 4.1.1.
1.
Power on the system and press ESC key to enter BIOS setup menu, and choose the “Administrator Secure Boot”.
2.
Set “Enforce Secure Boot “to Disabled.
3.
Press F10 to save and exit, and it will pop up a dialog to remind you that the system will reset. Click “OK”, and the system will
restart.
