Vante SEBRA MINI 2380, Operation Manual

Page: 21 / 33

15
P/N VT-108723-US, Manual revision: C Vante
®
SEBRA
®
MINI
™
Tube Sealer Power Source
3-4 Power source operation
Caution: The battery pack and RF power source connectors are keyed to
engage properly. Be sure that the RED battery pack connector is engaged into
the RED power source connector, and the BLACK into the BLACK. If they do
not engage easily, do not attempt to force the connectors together. Improper
battery connection will result in damage to the RF power source and will void
the warranty.
Figure 3-4, Battery to Power Source Connection
7. Close and latch the battery compartment door. If desired, install the RF
power source into its carrying pouch.
Caution: Do not use the battery outside the sealer case or operate the sealer
without a door. Damage to the sealer and battery may occur.
8. Attach one end of the RF power cable to the power source and the other
end to the sealing head. Connect the cable by pushing the connectors
together and rotating clockwise until locked (see 3-5).
Model 2380
RF Power Source
Outlet
Model 1105
Sealing Head
Model 1103
RF Power Cable
Figure 3-5, Attachment of RF Power Cable
Warning: Do NOT attempt to use any other length or type of RF power
cable. Unauthorized substitution of the RF power cable may result in
malfunction of the Power Source and will void the warranty!