Vante SEBRA 2605, Operation Manual

Page: 24 / 32

P/N VT-108732-US, Manual revision: C
Cleaning the Sealing Head 4-
6
C
LEANING
S
EALING
H
EAD
C
ASE
1. Disconnect the Sealing Head from the power source.
2. Apply a cleaning solution made from a mild detergent or household
cleaner such as Formula 409 ® (NO BLEACH) and water to a soft wiping
tissue. Wipe the power source and/or Segmenting Head case with the
damp tissue until clean. Make sure the surfaces are completely dry before
putting back into service.
Caution: Do not apply fluids directly to the Sealing Head case and do not over
saturate the cleaning solution applicator. The fluids may run into the electronic
components and cause contamination of the electronics and subsequent unit
malfunction. Never immerse the power source or Segmenting Head in any liquid.
Use only alcohol to clean the sealing region and adjacent areas.