VANPOWERS URBANEASE Series, User Manual, Page: 52 / 61

05 Display Error Codes
This electric bike is equipped with an error detection system integrated into the display. In the event of an electrical system
malfunction, the display will show an error code. Below are the most common error codes. If your bike displays an error code at
any time, please contact Vanpowers Service Center immediately or seek technical support at your nearest store.
Error Code Definition
84
86
82
81
91
92
89
80
48
52
53
Transmission failure
Controller overvoltage
Error with the hall sensor signal
Error with the Engine phase’s (overcurrent)
Motor overheating
Motor speed sensor malfunction
Controller overheating
Display communication failure
Battery Overvoltage
Battery temperature too high
Battery temperature too low
50