Vanguard 6500 PLUS, Installation Manual

Page: 88 / 102

2-80 Installation
Installing Software Options
Enabling A Software Access Key
Follow These
Steps... Follow these steps to enter the number at the node's control terminal:
After you receive the printed version of the SAK, save a copy in a safe place in case
you have to enter it again.
Step Action Result/Description
1
Access the CTP. One way to do
this is to connect a terminal to a
local PAD port (Port 6), and enter
the following at the
*
prompt:
.ctp <CR>
You are prompted to enter the
password.
2
Enter the password. The default password is
<CR>
.
After you enter the password, the
Main menu appears.
3
From the Main menu, select
Configure.
4 Select
Software Key Table.
5
At the *Key Value prompt, enter
the SAK.
If... Then...
You change the
SAK number or
enter the wrong
one by mistake The option is
disabled.
You make a
mistake entering
the SAK Blank out the
entry by
pressing the
space bar and
enter the SAK
number again.
6
Boot the node to implement the
option.
Note
You need a separate SAK for each
node in which the option is to be
enabled.