Vanguard 6500 PLUS, Installation Manual

Page: 3 / 102

Notice (continued)
Proprietary Material
Information and software in this document are proprietary to Vanguard Managed Solutions
(or its Suppliers) and without the express prior permission of an officer of VanguardMS, may
not be copied, reproduced, disclosed to others, published, or used, in whole or in part, for any
purpose other than that for which it is being made available. Use of software described in this
document is subject to the terms and conditions of the VanguardMS Software License
Agreement.
This document is for information purposes only and is subject to change without notice.
Radio Frequency Interference Regulations
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications.
Changes or modifications not expressly approved by VanguardMS could void the user's
authority to operate the equipment.
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
This is a Class A product. Operation of this equipment in a residential environment may
cause radio interference, in which case the user may be required to take adequate measures to
correct the interference at his/her own expense.
You can obtain the proper cables from VanguardMS.
To comment on this manual, please send e-mail to LGEN031@vanguardms.com
Writer: Bob Nichols
Publication Specialist: Denise Skinner
Illustrator: Tim Kinch Part No. T0002, Rev C
Publication Code: KP
First Printing: April 1996
Manual is current for Release 5.2 of VanguardMS’sOperating Network Software.