Vanguard 25E300, Repair Manual

Page: 80 / 104

Fuel Tank
Depending on your engine's trim, the fuel tank may be
remotely mounted on the equipment. Consult your equipment
repair manual for proper procedures. If your engine is
equipped with a fuel tank mounted atop the engine, proceed
as follows.
Fuel Tank - Removal
1. Drain the fuel tank by running the engine until the tank is
empty.
2. Remove front cover panel. See Front Cover Panel -
Removal .
3. Starting at the front of the engine (blower housing side),
remove the front fuel tank fastener ( A , Figure 26).
26
4. At the rear of the engine (PTO side), remove the rear fuel
tank fastener ( A , Figure 27).
27
5. At the side of the engine (starter motor side), remove the
two side fuel tank fasteners ( A , Figure 28).
28
6. Lift the fuel tank vertically to access the fuel lines.
81
Not for
Reproduction