Operation
Charging the lamp
When charging the lamp, make sure that the lamp is switched off and that the switch is in central
position. The red LED indicator light up as soon as the adapter is supplied with power (230-240V or 12
volt)
-
230-240 volt: Plug the adapter into the socket and plug the other end into the lamp.
-
12 volt: Plug the 12 volt adapter in cigarette lighter inside your vehicle and plug the other end into
the lamp.
It takes approximately twelve hours before the lamp is fully charged. When fully charged, the lamp will
burn for approximately 12 hours.
Operating the lamp
The lamp can be switched on and off manually or with the remote control.
Manual:
To switch on the lamp manually, press the green button once. The lamp will start burning and the
green LED indicator light below the green button will light up. To switch off the lamp, press the green
button once more. Now the lamp stops burning and the green LED indicator light is off.
Remote control:
To operate the lamp with the remote control, first press the green button three times. The orange LED
indicator light lights up. Now you can switch the lamp on and off by using the included remote control.
Important
·
Before using it for the first time, charge the lamp for 16 hours.
·
Remove the plug from the socket when the lamp is fully charged to increase the life of the battery.
·
Do not remove the internal battery from the lamp. The battery can be charged simply by plugging in
one of the included adapters.
·
Keep the lamp away from open
fire.
This might cause the internal battery to explode.
