Vango 1080p DLP LED, User Manual

Page: 30 / 55

29
to purchase VANGO : http://www.plasmapan.org | http://www.suovango.com
Basic Operatio
n
Use this option to determine how the color components of an input signal are decoded for accurate color on
the display. In most situations, the Auto setting produces the most accurate colors. If it does not, try the other
settings and select the one that does.
To remove any trace of color from the white areas of the projected image, choose White Balance from the
Picture menu and press ENTER.
Gain:
Use the Gain controls to correct color imbalances in the bright areas of the image.
Offset:
Use the Offset controls in the White Balance sub-menu to correct color imbalance in the dark areas
of the image.
This control compensates for incoming elevated black levels present in certain video signals. For some types
of video, you may want to override the setting. Set it to 0 IRE if blacks appear elevated (dark gray). If blacks
appear “crushed” (too dark), set it to 7.5 IRE.
Color Space
White Balance
Black Level
Picture Setting
This function stores Brightness, Contrast, Color, Tint, Sharpness, Gamma, Color Temperature, Color Space,
White Balance, and Black Level set in “Picture”. Each stored setting is reassigned to each input and
resolution mode.
Note
• When Recalling Saved Contents:
When a saved memory number is selected, the contents of the “Picture” menu change to the
adjustment values of the saved memory number.
• When Editing Saved Contents:
Edit the contents of the “Picture” menu after selecting the Memory number for which
adjustment values are to be edited.
• The default three modes Normal/Bright/Movie cannot be saved in the memory.