![background image](http://html1.mh-extra.com/html/vango/1080p-dlp-led/1080p-dlp-led_user-manual_3379986025.webp)
24
Basic Operation
Image Projection
Basic Procedure
Connect the required external equipment to the
projector before operating the following
procedures.
Info
•
The language preset at the factory is English.
If you want to change the on-screen display
to another language, reset the language
according to the procedure on page 25.
1
Plug the power cord into the wall
outlet.
•
The power indicator illuminates blue,
and the projector enters standby mode.
2
Press
on the remote control.
•
The power indicator turns off.
Note
The power indicator illuminates,
indicating the status of the LED.
•
Blue: The power is ready.
•
Blue blinking: The fan is cooling.
3
Press INPUT 1~4 buttons on the
remote control to select INPUT
modes.
Note
Note
•
Set SCART enabled before selecting
the SCART input.
INPUT 1
INPUT 2
INPUT 3
INPUT 4
T
,
S
,
W
,
X
buttons
EXIT button
Power button
MENU button
INPUT 2 button
INPUT 1 button
INPUT 4 button
INPUT 3 button
About the INPUT modes
INPUT 1
Selects the source Com-
ponent RCA / SCART.
INPUT 2
Selects the source HDMI
1 or 2.
INPUT 3
Selects the source Video
or S-Video.
INPUT 4
Selects the source PC.
Summary of Contents for 1080p DLP LED
