Appendix
50
Troubleshooting
Problem
Check
Projector does not start.
Projector power cord is not plugged into the wall outlet.
Remote control batteries have run out.
No picture
The selected input mode is wrong.
Cables may be incorrectly connected to the rear panel of the projector.
Power to the external connected device is off.
The video signal format of the video equipment is not set correctly.
Color is faded.
Picture adjustments are incorrectly set.
Picture is blurred.
Adjust the focus.
The projection distance exceeds the focus range.
Picture noise appears.
(Component/VGA input only)
Perform "Fine Sync" adjustments ("Clock" adjustment) also in Component.
Perform "Fine Sync" adjustments ("Phase adjustment) also in Component.
Picture is green on INPUT1
COMPONENT.
Change the input signal type of the video equipment.
Picture is dark.
Picture adjustments are incorrectly set.
Picture is too bright and
whitish.
Picture adjustments are incorrectly set.
Summary of Contents for 1080p DLP LED
