V&P Scientific, Inc.
4
Technical Note 396C
ALIGNING PIPET TIPS TO THE SpinVessel® TUBE
Insert the SpinVessel® tube VP 830SV-300FB into
the SpinVessel® drive base.
Ensure that the SpinVessel® tabs are seated flat and
registered to the slots in the aluminum spin base.
SpinVessel® tube should not rotate within drive
base.
Place SpinVessel® motor unit in
desired location, either on an
automated liquid handler or on a
benchtop.
The motor unit is SBS/SLAS format
(127.7mm x 85.5mm) which will fit into
any SBS/SLAS plate locator or carrier.
To align pipet tips to inside of
SpinVessel® tube, use the registration
disc VP 418SV-300FB. Place disc on top
of the drive base, not the tube. Lower
the tips until they just touch the disc.
Align tips to the holes.
Z height needs to be adjusted with tube
in place.
