VANDERHALL VENICE 2017, Owner'S Manual

Page: 88 / 109

88
Fabric/Carpet/Leather
Start by vacuuming the surface using a soft
brush attachment. If a rotating vacuum
brush attachment is being used, only use it
on the floor carpet. Before cleaning, gently
remove as much of the soil as possible:

Gently blot liquids with a paper towel.
Continue blotting until no more soil
can be removed.

For solid soils, remove as much as
possible prior to vacuuming.
To clean:
1. Saturate a clean, lint-free
colorfast cloth with water.
Microfiber cloth is recommended
to prevent lint transfer to the
fabric or carpet.
2. Remove excess moisture by gently
wringing until water does not drip
from the cleaning cloth
3. Start on the outside edge of the
soil and gently rub toward the
center. Fold the cleaning cloth to
a clean area frequently to
prevent forcing the soil in to the
fabric.
4. Continue gently rubbing the
soiled area until there is no
longer any color transfer from
the soil to the cleaning cloth.
5. If the soil is not completely
removed, use a mild soap
solution followed only by plain
water.
If the soil is not completely removed, it
may be necessary to use a commercial
upholstery cleaner or spot lifter. Test a
small hidden area for colorfastness before
using commercial upholstery cleaner or
spot lifter. If ring formation occurs, clean
the entire fabric or carpet. After cleaning,
use a paper towel to blot excess moisture.
Caution
Soaking or saturating leather may cause
permanent damage. Wipe excess
moisture from these surfaces after
cleaning and allow them to dry
naturally. Never use heat, steam, or
spot removers. Do not use cleaners that
contain silicone or wax-based products.
Cleaners containing these solvents can
permanently change the appearance
and feel of leather and are not
recommended.