VANDERHALL VENICE 2017, Owner'S Manual

Page: 34 / 109

34
3. Using a known accurate speed device
(GPS or similar) drive your vehicle to the
calibration speed.
4. When the vehicle reaches the exact
calibration speed 30 mph, have a passenger
promptly press the button.
5. Calibration is completed. Speedometer
will exit calibration automatically and begin
displaying the correct speed
Emissions Inspection and Maintenance
Programs
If the vehicle requires an Emissions
Inspection/Maintenance test, the test
equipment will likely connect to the
vehicle's Data Link Connector (DLC).
The DLC is under the instrument panel to
the right of the steering wheel. Connecting
devices that are not used to perform an
Emissions Inspection/Maintenance test or
to service the vehicle may affect vehicle
operation. Contact Vanderhall Service if
assistance is needed
The vehicle may not pass inspection if:

The check engine light is on when
the engine is running.

Critical emission control systems
have not been completely
diagnosed. If this happens, the
vehicle would not be ready for
inspection and might require
several days of routine driving
before the system is ready for
inspection. This can happen if the
12-volt battery has recently been
replaced or run down, or if the
vehicle has been recently
serviced.

Contact Vanderhall Service if the vehicle
will not pass or cannot be made ready for
the test.