VANDERHALL VENICE 2017, Owner'S Manual, Page: 56 / 109

56
Resuming a Set Speed
If the cruise control is set at a desired
speed and then the brakes are applied or
TSC detected a slip condition, the cruise
control is disengaged without erasing the
set speed from memory
Once the vehicle reaches about 25 mph
(40 km/h) or more, move the thumbwheel
up toward RES/+ briefly. The vehicle
returns to the previous set speed.
Increasing Speed While Using Cruise
Control
If the cruise control system is already
activated:

Push the Cruise Control Speed
Adjust Switch upward and hold it
until the desired speed is
reached, then release the switch.

To increase the vehicle speed in
small increments, move the
Cruise Control Speed Adjust
Switch upward briefly and then
release it. For each press, the
vehicle goes about 1 mph faster.
Reducing Speed While Using Cruise
Control
If the cruise control system is already
activated:

Press the Cruise Control Speed
Adjust Switch downward and
hold it until the desired lower
speed is reached, then release
the switch.

To decrease the vehicle speed in
smaller increments, move the
Cruise Control Speed Adjust
Switch downward briefly and
then release it. For each press,
the vehicle goes about 1 mph
slower.
Pressing the Accelerator while using
Cruise Control
Use the accelerator pedal to increase the
vehicle speed. When you take your foot off
the pedal, the vehicle will slow down to the
previous set cruise control speed.
To override cruise control, briefly moving
the Cruise Control Speed Adjust Switch
downward will set the cruise control to the
current vehicle speed.