VANDERHALL VENICE 2017 Owner'S Manual Download Page 42

Page: 42 / 109

Exterior Lighting

Headlamps

The Headlamps are turned on
automatically at normal brightness when
the vehicle is running.

Headlamp High/ Low-Beam Changer

(Headlamp High/Low-Beam

Changer):

Push the turn signal lever away

from you to turn the high beams on. Push
the lever again or pull the lever toward you
to return to low beams.

This indicator light turns on in the
instrument cluster when the high-beam
headlamps are on.

Momentary High Beams/

To momentary activate the high beams; pull
the turn signal lever all the way toward you.
The release it.

Hazard Warning Flashers

(Hazard Warning Flasher) :

Press and momentarily hold this button to
make the front and rear turn signal lamps
flash on and off. This warns others that you
are having trouble. Press and momentarily
hold again to turn the flashers off.

Summary of Contents for VENICE 2017














































































































Search results

Summary of Contents for VENICE 2017

Reviews:

Related manuals for VENICE 2017

Brands by name

Popular brands

VANDERHALL VENICE 2017, Owner'S Manual

Search results

Summary of Contents for VENICE 2017

Reviews:

Related manuals for VENICE 2017

Brands by name

Popular brands