Vanco RS232-IP Manual Download Page 21 | Manualshive

Page: 21 / 24

background image

www.vanco1.com

800-626-6445

21

SAFETY AND NOTICE
RS232-IP has been tested for conformance to safety regulations and requirements, and has been certified for
international use. However, like all electronic equipments, the RS232-IP should be used with care. Please read
and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to
the unit.

•  Follow all instructions and warnings marked on this unit.
•  Do not attempt to service this unit yourself, except where explained in this manual.
•  Provide proper ventilation and air circulation and do not use near water.
•  Keep objects that might damage the device and assure that the placement of this unit is on a stable surface.
•  Use only the power adapter and power cords and connection cables designed for this unit.
•  Do not use liquid or aerosol cleaners to clean this unit.
•  Always unplug the power to the device before cleaning.

«
...
19
20
21
22
23
...
»

Summary of Contents for RS232-IP

























Reviews:

No comments

Related manuals for RS232-IP

Brand: Velux Pages: 10

iPort PT1000-CL

Brand: Pleora Technologies Pages: 29

Brand: April Music Pages: 11

Pocketdish AV402E

Brand: Dish Network Pages: 2

THE-S55P3BB-USW

Brand: Tabuchi Electric Pages: 64

Brand: RadioLink Pages: 11

IP4K-500 Series

Brand: Altimium Pages: 38

Brand: Viking Pages: 6

Brand: CYP Pages: 9

Brand: Bush Pages: 42

Brand: INVT Pages: 174

SC-TDC-1000 D Series

Brand: Surface Concept Pages: 28

Brand: Pulse-Eight Pages: 2

Brand: HQ Power Pages: 8

Brand: M-system Pages: 2

Brand: KanexPro Pages: 16

Brand: Biamp Pages: 6

Brand: Sunforce Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands