www.vanco1.com
800-626-6445
7
LAN Interface and WAN Connections
The RS232-IP utilizes two network interfaces with a WAN port and LAN port. The interface uses a standard
RJ45 connector as shown below:
The following table shows the pin definitions of RJ-45:
Pinout
Number
Function
Direction Description
1
TX+
Output
Transmit Data +
2
TX-
Output
Transmit Data -
3
RX+
Input
Receive Data +
4
N/A
N/A
N/A
5
N/A
N/A
N/A
6
RX-
Input
Receive Data -
7
N/A
N/A
N/A
8
N/A
N/A
N/A
RST Button
The RST (reset) button is used to reset the RS232-IP to factory default settings. When the RS232-IP
completes startup, press and hold the RST button for 10 seconds. All of the parameters and settings of the
unit will be reset to default.
5V Power Input
Voltage range: 4.5 ~ 5.5V. The default configuration of RS232-IP for the power adapter is 5V/1A DC power
supply.
Antenna Terminal
Standard SMA interface within the outer spiral needle.
LED Indicator light
Wifi Status: LED light blinking: Connected to Wifi; LED light off: Not connected to Wifi
